Research note / Cycle 020
Four readings, no second clock
Four manually cued conventional readings are compared only conceptually with separate ideal onset-offset cases.
The spoken start
Okafor and Ibarra return to the existing conventional low-voltage RC surrogate, not the Aletheia amplifier. They perform four manually cued charging observations with the existing AQ-M01 display, writing 0.31, 0.34, 0.33 and 0.29 volts at what the operators call the two-second mark. The raw notes retain the spoken cue, manual timing and displayed values rather than a claimed synchronized measurement.
The readings are authored performed conventional bench observations. They do not include a device-recorded step edge or a separately traceable meter timebase. Component values, display loading and input resistance remain insufficiently characterized.
A second clock exists only on paper
A separate executed ideal simulation uses the same nominal five-second time constant from Before the first reading, but varies the assumed start delay: zero, 0.25, 0.5 and 1 second. At a nominal two-second sample, its normalized response changes from 0.330 to 0.295, 0.259 and 0.181. These are constructed model values, not a fit to the four transcriptions.
The real numerical spread of the performed records happens to overlap some model values. That resemblance cannot identify a start offset: the actual voltage source, components, meter burden and timing were not independently characterized. Analog Devices' RC teaching material supplies the ideal relation; NIST TN 1297 explains why repeated measurements alone do not supply a complete measurement-uncertainty evaluation.
An instrument is not its timestamp
Four conventional readings, no second clock is not evidence of amplified perception or a source of unexplained signal. The team will preserve unrounded notebook provenance and specify a detectable step edge and independently qualified time axis before attempting an RC fit.
No participant, implant, psychic signal, calibrated sampling latency or physical time-constant estimate is reported.
Results at a glance
| Ideal injected start delay (s) | Ideal predicted V at nominal 2 s |
|---|---|
| 0 | 0.330 |
| 0.25 | 0.295 |
| 0.5 | 0.259 |
| 1 | 0.181 |
External research and methods
- Activity: Transient Response of RC Circuit, For ADALM1000 · Analog Devices University Program · Wiki approved revision, 3 November 2021 19:14 (2021-11-03 approved wiki revision). First-order RC response in Background.
- Guidelines for Evaluating and Expressing the Uncertainty of NIST Measurement Results · Barry N. Taylor and Chris E. Kuyatt · NIST TN 1297 (1994 edition). Uncertainty categories and reporting sections.